The Multi-Port Decimator D3 uses state of the art digital technology and Fast Fourier Transformations to make lightning fast and accurate measurements. With a very low noise floor and large dynamic range, it is well-suited to measure any type of satellite, cable or terrestrial wireless carrier, including very small carriers, beacon signals and for carrier monitoring applications. Decimator accepts all signals from 5 MHz to 3 GHz and input power lev- els ranging from –110 to +5 dBm. RBW varies from 1 Hz to 15 MHz. The Decimator can be connected to an external 10 MHz reference for improved frequency accuracy and stability. All data communications with the Decimator occurs via its built-in Ethernet port.
It can be installed anywhere, occupying only 1U in a standard equipment rack, allowing you to monitor up to 8 different feeds. This is ideal for a teleport, VSAT hub cable head end, cell tower or broadcast facility with multiple feeds to monitor. It is available with 75-ohm F-type connectors or 50-ohm SMA connectors on the inputs. It can also be provided as a 4-Port Decimator, which is the same unit limited to 4 operational ports, allowing expansion to the other 4 ports in the future if required. No need to install additional hardware.
The 8-Port Decimator’s powerful Graphical User Interface (GUI) is available using any standard web browser. No additional software is required. The GUI is very easy to use and operates like most traditional spectrum analyzers. It provides user-selectable colors for markers and traces, allows storage of multiple traces and provides measurement reporting. The Decimator GUI also includes two powerful applications: The built-in Carrier Monitoring function provides notification via email or SNMP of carrier measurements that exceed user-defined limits, offering you peace of mind that up to 100 of your carriers are operating as expected. The 8-Port Decimator also includes a convenient Cross-Pol Isolation measure- ment function, allowing you to display both Co-Pol and Cross-Pol signals simultaneously, along with the isolation value.
The 8-Port Decimator provides network access to all technical staff connected to the facility network or a corporate wide area network. This allows all technical staff the ability to monitor feeds and carriers at any time and from any location in the world using only a web browser.
It can be installed anywhere, occupying only 1U in a standard equipment rack, allowing you to monitor up to 8 different feeds. This is ideal for a teleport, VSAT hub cable head end, cell tower or broadcast facility with multiple feeds to monitor. It is available with 75-ohm F-type connectors or 50-ohm SMA connectors on the inputs. It can also be provided as a 4-Port Decimator, which is the same unit limited to 4 operational ports, allowing expansion to the other 4 ports in the future if required. No need to install additional hardware.
The 8-Port Decimator’s powerful Graphical User Interface (GUI) is available using any standard web browser. No additional software is required. The GUI is very easy to use and operates like most traditional spectrum analyzers. It provides user-selectable colors for markers and traces, allows storage of multiple traces and provides measurement reporting. The Decimator GUI also includes two powerful applications: The built-in Carrier Monitoring function provides notification via email or SNMP of carrier measurements that exceed user-defined limits, offering you peace of mind that up to 100 of your carriers are operating as expected. The 8-Port Decimator also includes a convenient Cross-Pol Isolation measure- ment function, allowing you to display both Co-Pol and Cross-Pol signals simultaneously, along with the isolation value.
The 8-Port Decimator provides network access to all technical staff connected to the facility network or a corporate wide area network. This allows all technical staff the ability to monitor feeds and carriers at any time and from any location in the world using only a web browser.