SDS Server


 
Secure Device Server: 16 x RJ45 connector with Cisco pinout, 1U rack mount, software selectable RS232/422/485 interface, dual 10/100/1000Base-T Ethernet, advanced data encryption, user authentication and event management security features included, IPv6, COM port redirector, 15kv ESD. AC power adapter included.

Processor MPC8349E, 400 Mhz, 750 MIPS
Memory
RAM MB 64 64
Flash MB 16 16
Interface Ports
Number of Serial Ports 8 16
Serial port interface Software selectable RS232 / RS485 / RS422 DTE on RJ45
Sun / Solaris Sun / Oracle ‘Solaris’ Safe – no “break signal” sent during
power cycle causing costly server re-boots or downtime
Serial port speeds 50bps to 230Kbps with customizable baud rate support
Data bits 5,6,7,8, 9-bit protocol support
Parity Odd, Even, Mark, Space, None
Flow Control Hardware, Software, Both, None
Serial port protection 15Kv Electrostatic Discharge Protection (ESD)
Local console port RS232 on RJ45 with DB9 adapter (provided)
Network 10/100/1000-base TX Ethernet RJ45
Software selectable Ethernet speed 10/100/1000, Auto
Software selectable Half/Full/Auto duplex
Ethernet Isolation 1.5Kv Magnetic Isolation
Power
Power Supply USA models – IEC320-C13 to NEMA 5-15P line cord
UK models – IEC320-C13 to BS1363 line cord
EU models – IEC320-C13 to CEE 7/7 Schuko
South Africa Models – IEC320-C13 to BS546 line cord
Australia models – IEC320-C13 to AS3112 line cord
Nominal Input Voltage 110/230v AC
Input Voltage Range 100-240v AC
AC Input Frequency 47-63Hz
Current Consumption @ 100v ( Amps ) 0.12 0.13
Current Consumption @ 240v ( Amps ) 0.06 0.06
Typical Power Consumption (Watts) 12 13
Power Line Protection Fast transients: 1 KV (EN61000-4-4 Criteria B)
Surge: 2KV ( EN61000-4-5 common mode),
1KV ( EN61000-4-5 differential and common modes)
Indicators
LEDs Power
System Ready
Network Link activity
Serial: Transmit and Receive data per port
Environmental Specifications
Heat Output ( BTU/HR ) 42 45
MTBF( hours )* 140,740 110,300
Operating Temperature 0C to 55C, 32F to 131F
Storage Temperature -40C to 85C, -40F to 185F
Humidity 5 to 95% (non condensing) for both storage and operation.
Case SECC Zinc plated sheet metal (1 mm)
Ingress Protection rating IP30
Mounting 1U – 19″ rack, front and rear mounting hardware included
Product Weight and Dimensions
Weight 3 kg 3.1 kg
Dimensions 1U Rack form factor – 26.4 x 43.4 x 4.4 (cm), 10.38 x 17.1 x 1.75 (in)
Skip to content